L-1800INTER-M

BrandINTER-M

CategoriesPiano

2Ω – load stable per channel, 4Ω – load stable in bridge mono
2U rack space
Selectable High Pass Filter on each channel
Clip limiter circuitry
Forced air cooled (front panel intake, rear panel exhaust)
Front panel indicators for different operating modes
Front panel indicators for output signal level, clip, protect, and power
Rack Ears for permanent installation in a standard 19” (rack mount width) enclosure.
Detachable AC power cord

			L1800
Power Output Level	STEREO	RL=8Ω @ 0.1% THD	360W
	1kHz both channels driven	RL=4Ω @ 0.1% THD	600W
		RL=2Ω @ 0.5% THD	900W
	BRIDGED	RL=8Ω 1kHz @ 0.1% THD	1200W
	BRIDGED	RL=4Ω 1kHz @ 0.5% THD	1800W
Frequency Response RL=8Ω, P=1W			20Hz~20kHz: ±0/1dB, 5Hz~70kHz: -3dB
Total Harmonic Distortion f=20Hz~20kHz, Half Power(L800/1400)	STEREO	RL=8Ω & 4Ω	≤0.03%
1/10Power(L1800/2400/3000)	BRIDGED	RL=8Ω	≤0.03%
Channel Separation Half Power RL=8Ω, f=1kHz, ATT. max. Input 600Ω Shunt			≥80dB
Residual Noise(DIN Audio Filter)			≤-85dB: ATT min.
Signal-to-Noise Ratio DIN Audio, Input 600Ω Shunt			≥100dB
Input Sensitivity (Rated Power into 4Ω 1kHz)			3.5dBu
Damping Factor RL=8Ω, f=1kHz			≥400
Voltage Gain (ATT max.) 4Ω at 1kHz			33dB
Output Circuitry			H Class
Input Impedance (ATT max.)			≥20kΩ (Balance/Unbalance)
Indicators			Power (Blue)
			Clip/Limiter (Red)
			Signal (Green)
			Protection (Red)
			Mode Selector (Yellow)
Protection			Power SW ON/OFF muting, Full Short circuit,
Protection			Thermal protection, RF protection
Fan Circuit			Low-Speed – Variable – Hi-Speed
Operating Temperature			-10°C ~ +40°C
Power Source			100-120VAC or 220-240VAC; 50/60Hz
Power Consumption(1/8 POWER)	100V-120VAC Both Channel Driven RL=4Ω		8A
Power Consumption(1/8 POWER)	230V-240VAC Both Channel Driven RL=4Ω		4A
Dimensions			482(W) x 88(H) x 369(D)mm / 19(W) x 3.5(H) x 14.5(D)in
Connector			Inputs: balanced combination connector(XLR type+1/4″ TRS) Outputs: 5-Way binding posts x 2, Speakon Terminal x 2